Gloves for Metal Fabrication
Sheet edges, stampings, burrs and swarf: metal fabrication is cut work first and grip work second.
Start from the cut line's sandy and micro-foam models. FS913C3 (13-gauge HPPE, sandy nitrile, EN 388 4X43C / ANSI A3 as printed) is the oily-press workhorse; FM913C (micro-foam nitrile, 4X43C / A3) suits dry handling and deburring where feel matters. For the heaviest sheet work, FS913F6 and HC7113 carry printed ANSI A6 levels — check their model pages for the full printed strings.
Match the finish to the surface: sandy nitrile where parts are oily, micro-foam where they are dry. Ratings on this site are per model, as printed in the manufacturer's catalog, and test reports are available on request.
Models buyers start with
MODEL FS913C313-Gauge HPPE Sandy Nitrile Gloves
13-gauge · HPPE · Sandy Nitrile · EN 388 4X43C · ANSI A3
View model ↗
MODEL FM913C13-Gauge HPPE Micro-Foam Nitrile Gloves
13-gauge · HPPE · Micro Foam Nitrile · EN 388 4X43C · ANSI A3
View model ↗
MODEL HC711313-Gauge Sandy NBR Cut-Resistant Gloves
13-gauge · NBR Sandy · EN 388 4X43F · ANSI A6
View model ↗Specify gloves for this work
Describe the tasks and hazards. We will point to the models whose printed specifications fit — and say so if none do.